• info@businessconsultancy.co.nz
  • 05085-SMART
Submit Property
click to enable zoom
Loading Maps
We didn't find any results
open map
My Location Fullscreen Prev Next
Advanced Search
We found 0 results. Do you want to load the results now ?
Advanced Search
we found 0 results

Your search results

Tips for Accepting an Existing Construction Project

Posted by smartadmin1 on May 9, 2017
| 0

At some point, you may find yourself taking over a project from another construction company. While it is certainly an opportunity, it is not the most pleasant of circumstances. In addition to facing a number of delays, you may also have to contend with a lot of unknowns. This type of project is not something that can be smoothed out overnight. However, with dedication and hard work, you should be able to get everything up and running, better than before. Here are some handy tips to help you out with this:

Understand What Went Wrong

It is quite likely that you had assumed control over the project because something went wrong. It could be the previous construction company or it could be issues with the land itself. The problem could even be funding. The first thing you will need to do is to determine just what went wrong and why. This will allow you to address these issues headfirst and also make sure that you won’t be making the same mistakes. It is best not to start working until you can identify what some of the red flags are. Rushing into anything too soon could just mean that you fall into the same problems as the previous company.

Review the Work

As you were not personally involved in the project until now, there is no way for you to determine the quality of the work. For all you know, the previous crew may have done some poor work. This is why concrete scanning Melbourne, for one, should be at the top of your to-do list. It will give you a clearer idea of what you are dealing with. It will inform you about the structural integrity of the work that has been done so far. Also, it will let you know about any wiring or rebar that may already been in place. You certainly don’t want to drill into something like that, after all.

Communicate with the Client

You must remember that the client already discussed their vision with the earlier contractors. Therefore, they may forget to go through it with you as well. Or, they may do so with less detail. Nonetheless, it is important that you sit down with the client and go through everything once more. This is important for a few reasons. First, it helps you understand exactly what they want and thus, allows you to produce what they require. Second, it also gives you an opportunity to discover any potential problems with that plan. If something is not feasible, now is the time for you to point it out.

Create a New Budget and Timeline

Once you have gathered all of the information that you need, it is time to come up with a new budget and a new timeline as well. You will have to do this before any work is started. The client is going to need to agree to these revised plans first. Make sure that whatever you are putting together is achievable and reasonable. It is best to not make any further changes unless absolutely necessary. If possible, provide justifications for your predictions with both time and money. This will be helpful in convincing your client to agree to your terms.

Now you are aware of what you should start with if you have just taken over a construction project from someone else.